S1 Practical Checkout Requirement Sheet

S1 Checkout Sheet Requirements

General Information

Item	Standard	7110.65	ZJX	Completion Standard
#1	Demonstrates SOP/Policy Knowledge and Adherence		SAV SOP SFB SOP JAX SOP	Demonstrates knowledge for Clearance Delivery and Ground Procedures at each field.
#2	Select appropriate frequency for position		SAV SOP SFB SOP JAX SOP	Selects the correct frequency for the position controlling.
#3	Controller ATIS in accordance with Standard Operating Procedures	2-9-3	vATIS	Demonstrates knowledge of the setup and use of vATIS
#4	Possesses basic airport information for position		SAV SOP SFB SOP JAX SOP	Demonstrates knowledge about the field and its locations to include: Ramps, Non-movement and movement areas, Restricted Areas, etc.
#5	Understand basic METAR information	2-6		Able to read and decipher basic metar elements to include: Time/Date, Wind Speed/Direction, Visibility, Ceiling, Temperature, Dewpoint, Altimeter.
#6	Position Relief Briefing in accordance with Standard Operating Procedures		Chapter 4	Able to complete a position briefing for opening and closing of a position.
#7	Exhibits basic airspace knowledge	2-4-22		Demonstrates basic knowledge of the different airspace: Class A, B, C, D, E, G

Clearance Delivery

Item	Standard	7110.65	ZJX	Completion Standard
#1	Exhibits knowledge of Basic VFR WX Minimums	CFR Part 91		Demonstrates knowledge of VFR Wx Minimums and is able to assist pilots when Wx is Below Minimums. (note: CoC VATSIM)
#2	Exhibits basic knowledge of aircraft types		Type Designator	Demonstrates basic knowledge of aircraft types to include: Jet, Prop, Turboprops, Helicopters.
#3	Issues appropriate VFR departure clearance	Chapter 7		Issues with no issues VFR departure clearances using the appropriate requirements per airspace.
#4	Uses proper phraseology	2-4-16		Uses proper NATO phonetic alphabet and number groupings.
#5	Understands coordination with APP/DEP for all aircraft prior to departure		SAV SOP SFB SOP JAX SOP	Issues appropriate request for non-SOP items with those affected.
#6	Properly reviews flight plan to ensure they comply with all LOA and SOP Standards and conveys all amends.		SAV SOP SFB SOP JAX SOP	Reviews all flight plans and corrects all mistakes in the flight plan and with the pilot.
#7	Review requested FL/ALT (Direction of Flight) and conveys all amendments	4-5-2		Reviews all requested FL/ALT and corrects all mistakes in the flight planand with the pilot.
#8	Clearance issued using CRAFT standards	4-2-1	SAV SOP SFB SOP JAX SOP	Issues IFR clearances using CRAFT standards and following ALL SOP restrictions
#9	Knowledge of proper transfer of communications	8-2-2		Ensures proper communication transfer using proper phraseology
#10	Proper readhback received (if not, one is requested) and confirmed	2-4-3		Ensures proper readback of the required elements is read (any changes) or instructs pilot on what is needed to readback.

Item	Standard	7110.65	ZJX	Completion Standard
#1	Knowledge of Area of Responsibility	3-7	SAV SOP SFB SOP JAX SOP	Understand and complies with the area of responsibility includes: movement and non-movement areas
#2	Proper taxi phraseology	3-7-2		Issues taxi instructions clearly and correctly in a concise manner.
#3	Proper Runway Crossing and Coordination	3-7-2		Request all runway crossing and coordination there unto.
#4	Progressive Taxi-Instructions/Taxiway Layout	3-7-2		Issues correct progressive taxi instructions
#5	Parking assignments	3-7-2	SAV SOP SFB SOP JAX SOP	Aircraft at taxied to the requested parking assignment. Controller also has basic knowledge of Airline/Aircraft Parking Locations. (Airliners at Terminal, etc)
#6	Knowledge and importance of Hold Short	3-7-2		Controller issues correct hold short instructions
#7	Ground Sequencing	3-7-2		Controller sequencies aircraft using the phraseology of "follow" "Behind" and "without delay"
#8	Helicopter Operations	3-11-1		Controller defines the three movement types and explains or demonstrates the difference between hover and air taxi.

Use of this checklist is mandatory for all Controller Exams (Promotion and Re-Qualification) .  All 25 items must be covered during the evaluation by either observing the student for each item, or via oral question.  Students must pass 90% of all the items listed, with no Critical Task Failures. Regardless of pass/fail status, ALL failed items will be reviewed with the student by the INS/MEN to ensure comprehension.